No products in the cart.
ASENWARE CONVENTIONAL FIRE ALARM PANEL 8 ZONE-PLASTIC(AW-CFP2166-8C)
₱27,870.00
The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2＆4 standard.
8 Zone Fire alarm control Panel Specification
1.It is modularized design, the panel can expend from 1 zone to 32 zones easily.
2.It has 2 level control mode by a lock
3.It has 24VDC and 5VDC power supply output.
4.It has FIRE and FAULT signal output.
5.It has 2 general sounders output.
6.Each zone has 1 circuit detectors input .
7.Each zone can be disable by a button.
8.It has RESET button to reset the panel.
9.It has SILENCE button to stop BUZZER and SOUNDERS.
10.It has EVACUATE button to start a manual fire alarm immediately.
11.It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
12.It has an optional GSM module for fire alarm by SMS .
Product Features
8 Zone Fire alarm control Panel Specification
1.It is modularized design, the panel can expend from 1 zone to 32 zones easily.
2.It has 2 level control mode by a lock
3.It has 24VDC and 5VDC power supply output.
4.It has FIRE and FAULT signal output.
5.It has 2 general sounders output.
6.Each zone has 1 circuit detectors input .
7.Each zone can be disable by a button.
8.It has RESET button to reset the panel.
9.It has SILENCE button to stop BUZZER and SOUNDERS.
10.It has EVACUATE button to start a manual fire alarm immediately.
11.It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
12.It has an optional GSM module for fire alarm by SMS .
Technical parameters
| ITEM | 8 Zone Fire alarm control Panel |
| Model No. | AW-CFP2166-04-16 |
| Mains supply voltage | 110VAC or 240VAC |
| Internal power supply | 27.2VDC |
| Total output current limited | 3A @ 240VAC |
| Batteries (Default Configuration) | 12V2AH*2-24VDC in Total |
| End of Line device | 6.8k Q,5% tolerance, 0.25W (color code-blue, grey, red, gold) |
| End of line resistor value | 6.8k 22,5% tolerance, 0.25W (color code-blue, grey, red, gold) |
| Dimensions(mm) | 395*502″124mm |
| Weight (without batteries) | 7kg |
| Weight (with batteries) | 9.6kg |
Related products
₱9,400.00
₱1,000.00
₱500.00
₱1,500.00
₱1,000.00
₱3,100.00
₱16,900.00
₱1,000.00